Motorization Retrofit in Smith Valley by Smith Valley Window Treatments

Somebody drags a drapery panel by hand twice a day

The patio door verticals still get pulled by hand

Shades over a stair nobody has raised in a year

The remote works, but nothing ever happens on time

Cloth on a high window faded unevenly because half never moves

You want the shades you already own to run themselves

Chains hang beside a patio opening in a family room

Half the house is motorized and half isn't

A tall window behind furniture never gets touched

You want the west shades down before the glare starts

Every existing headrail identified by manufacturer and product line before any motor is discussed

We offer repairs only on treatments The Window Valet installed or has serviced before. If we haven't worked on your treatments, we'll book a consultation for new ones. Retrofit compatibility checked against what the maker actually publishes, since most headrails were never built to take a motor

Roller tube diameter and idler end measured, because on rollers the fabric moving to a motorized tube is often the real path

Existing fabric assessed for age and sun damage, so nobody spends motor money on cloth with two years left in it

We offer repairs only on treatments The Window Valet installed or has serviced before. If we haven't worked on your treatments, we'll book a consultation for new ones. Cellular, pleated and woven shades reviewed case by case, as retrofit kits for those are the exception rather than the rule

Vertical tracks and horizontal blind tilt mechanisms treated as separate questions with separate answers

Finished weight and drop compared against the motor's published lift capacity rather than assumed

Power method chosen per opening: a battery wand, a rechargeable pack with trickle charge, or hardwired low voltage

Battery interval disclosed in writing before the order, since Hunter Douglas states PowerView battery life is about one year

Charging access considered on high openings, because a shade you need a ladder to recharge becomes a shade nobody recharges

Radio range checked from the intended control location to the furthest opening before hardware is committed

Repeater placement planned where masonry or distance sits between the control and the shade

Control scheme decided up front: handheld remote, wall keypad, app, or a scene that runs on a schedule

Travel limits set at commissioning and rechecked once the fabric has hung and relaxed

Header power coordinated with a licensed electrical contractor wherever hardwiring is the chosen path

We offer repairs only on treatments The Window Valet installed or has serviced before. If we haven't worked on your treatments, we'll book a consultation for new ones. The replace-instead recommendation given plainly where a retrofit would cost more than a new motorized shade

A signed contract covering the motors, the controls and the price before parts are ordered, per IC 24-5-11 above $150

Each retrofitted shade cycled top to bottom twice, with the remote and any keypad tested in the room

Roller tube motor: A tubular motor slides inside the roller tube and drives it directly. This is the most retrofittable product in the category, because if the existing fabric is sound it can often be transferred to a new motorized tube sized to the same brackets.

We offer repairs only on treatments The Window Valet installed or has serviced before. If we haven't worked on your treatments, we'll book a consultation for new ones. Manufacturer retrofit kit: Some makers publish a motor designed to drop into their own headrail, and where one exists it's the cleanest path by far. Where one doesn't, a generic motor will not simply fit, because headrail profiles are proprietary and were never designed to host one.

We offer repairs only on treatments The Window Valet installed or has serviced before. If we haven't worked on your treatments, we'll book a consultation for new ones. Battery wand motor: A slim battery pack that clips to the headrail or sits inside it. It's the least invasive power method and the reason most retrofits are possible at all in a finished house. The tradeoff is a replacement interval you're agreeing to before you buy.

Rechargeable pack with trickle charge: A rechargeable battery topped up from a small solar panel on the glass or from a plug. It stretches the interval considerably and it doesn't remove it. On a high opening it's often the difference between a workable system and one that gets ignored.

Hardwired low voltage: Power run to the header and no batteries at all. It's the durable answer and the hardest one to add to a finished wall, which is why it belongs in a renovation conversation. The electrical work is done by a licensed electrical contractor.

Tilt-only motors for blinds: On horizontal wood and faux wood blinds, some lines accept a motor that tilts the slats without lifting the blind. It solves the glare problem on a hard elevation at a fraction of the cost, and it leaves the lift exactly as it was.

Vertical track motorization: Motorized traverse on a vertical track, either as a new carrier set or as a replacement track. It's track-specific work, and whether your existing track can be driven is a manufacturer question rather than a general one.

We offer repairs only on treatments The Window Valet installed or has serviced before. If we haven't worked on your treatments, we'll book a consultation for new ones. Handheld remotes and wall keypads: The local control that talks straight to the motor. We fit one on every retrofit regardless of whether an app is in the plan, because a shade that only answers to a phone is a shade a guest can't operate.

We offer repairs only on treatments The Window Valet installed or has serviced before. If we haven't worked on your treatments, we'll book a consultation for new ones. Signal repeaters for retrofit motors: A powered device that carries the radio further into the house. Battery motors transmit at low power to protect their own life, so they have less margin than a plugged-in device, and a wall of masonry between the remote and the shade is a real obstacle.

Travel limit commissioning: Setting the stored top and bottom positions, then checking them again after the fabric has hung a few weeks and relaxed. Skipping the second pass is why a retrofitted hembar ends up sitting a half inch off the sill and staying there.